UK Building Regulations Part P | UK Building Regulations

UK Building Regulations Part P – Electrical Safety

When you are planning to build a new home or intending to purchase one, you should be able to adhere to these electrical safety guidelines for the benefit of the people in your dwelling. This will save you from accidents and injuries due to faults in electrical installations, thereby minimizing the risk of injury and fatality.

Design

Before you run on cables, place socket and position on your switches, you should consider the safety precautions of the particular spot where you wish to mount your electrical wirings. Design must be made and worked out without discounting the safety measures therein. For instance, when you decide to place an electrical outlet in your bathroom, it is apparently considered as a high-risk due to the presence of water, therefore it must have special protection measures to shield from the danger of electrical shock. Also, some types of fitting may be not allowed to be installed in such a room. The classification of the four zones for domestic installation should also be strictly followed, defining the design and placements of electrical wirings inside the bathroom.

As in the case of the overall plan of the house, a specific layout of where electrical wirings should run is necessary ensure systematic placements of cables.

Installation

With a design for electrical wirings well-defined, it would not be difficult to install them. All it takes to have is a qualified electrician to do your electrical installations. You will be at peace that the right things and placement of the wires are installed as they should be. Better yet, ensure that he is a member of Competent Person Scheme, self-certifying his own electrical work. By becoming a member of established national organization, he must have a defined and an audited competency and service quality, thus guaranteeing safety and compliance.

How for the case of reworks or additional installations? How do you go about the case of replacing damaged circuits or connection of a cooker to an existing connection unit? For these named cases, you need not notify the authorities with these work types. However, with the installation of new cooker circuit or a complete rewire, you should notify and seek the approval of your Local Council before proceeding to execute them.

Installation is the implementation of your design. Every detail as to how your design should be worked out must be executed. After all, the overall electrical safety of your dwelling lies at how efficient electrical wirings are installed.

Inspection and Testing

After due installation of all your electrical cables, the right government authorities will inspect your property to see to it that building regulations regarding adherence of electrical safety. This is to make sure accidents and fatalities are avoided due to the electrical concerns. A completion certificate will be issued once everything is in order. This will state the conformity of your dwelling with the electrical safety guidelines and will also give you a go signal to sell your property or have it insured with an insurance firm.

Get your copy today of the complete: